News:

Want Appleseed to grow and fill our firing lines?  We need help with advertising, social media, graphics design, and administrative tasks.  An hour of time spent at this level can have a huge impact.  You can make a difference!  Send a Personal Message to Cleveland.

Main Menu

M1 Garand .308 Conversion Question

Started by jeep45238, July 30, 2011, 10:43:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jeep45238

July 30, 2011, 10:43:52 AM
I love my United States Rifle, Caliber .30, M1.

I also love the FAL and .308 AR designs.

This leads me to a problem, since there aren't any .30-06 FAL or AR platforms from the factory, and I want to consolidate my calibers.  This means 7.62 NATO for a .30 cal cartridge that isn't rimmed.


For those of you that know a thing or two about the 7.62 NATO M1 conversion, can you use any surplus 7.62 (even off the shelf new manufacture).  The rifle will likely have a .308 chamber, but I'll probably be buying 7.62 NATO with anticipation of a FAL.

Will .308 Winchester in this rifle cause a problem due to a pressure spike at the gas port with a standard gas plug? 

Does it need (or recommend) an adjustable gas plug?


Thanks,
Mike
USAF A1C ~ Never settle for the ordinary.

Rights cease to exist when restrictions are put on them.

Old Dog

#1
July 30, 2011, 03:43:04 PM
A professionally built .308/7.62 Nato M1 Garand should function just fine with any GI (or foreign) surplus 7.62 Nato ammo.  Winchester white box is made to shoot in place of GI surplus for folks that don't buy in case/can/pallet quantities.

I would not shoot hunting .308 Winchester ammo in it without buying/installing an adjustable gas plug.  If the powder is not in the correct burn rate range you could damage the gas system on your M1.

There are 2 types/brands of adjustable gas plugs.  One is the McCann.  It has separate/different screws that you install to change the gas settings.   The Schuster has adjustable sleeve inside the gas plug that you can turn to set the gas system pressure.  I can't say either is better than the other but at least with the Schuster you don't have to find a place to keep the additional screws for when you need to change the setting.
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."

—Jeff Cooper, The Art of the Rifle

kenjo

#2
July 31, 2011, 02:43:10 PM
I have a Garand "Tanker" version chambered in 7.62. It is a fun rifle to shoot. It is optimized for the 147 - 150 grain bullet. I have a Schuster variable gas plug but have not installed it yet. If I decide to shoot heavier bullets I will certainly use the adjustable plug. Reloading ammo for it requires careful attention to type/burn rate of powder, case condition and trim length, etc. Winchester white box in 7.62 (147 gr) works well in it as does Washougal River Cartridge Co 147 gr.
"At what point then is the approach of danger to be expected? I answer, if it ever reach us, it must spring up amongst us. It cannot come from abroad. If destruction be our lot, we must ourselves be its author and finisher. As a nation of freemen, we must live through all time, or die by suicide."  Abraham Lincoln
Print
Go Up Pages1
User actions