Author Topic: Handloading 6.5 Creedmoor  (Read 181 times)

Offline airplanejoe

  • Instructor In Training 2
  • Sr. Member
  • ***
  • Posts: 320
Handloading 6.5 Creedmoor
« on: July 09, 2018, 08:44:35 AM »
I've done my fair share of handloading, but I've never tackled a caliber with different sizes for primer holes. My research revealed that you can get cases for the 6.5 Creedmoor with small or large primer holes (commercial cases). My question is: Do you need a different sizing die depending on primer hole size? Thanks.

aj
"History doesn not entrust the care of freedom to the weak, nor timid."
President D W Eisenhower

An optimist stays up all night to see the new year in. A pessimist stays up to make sure the old one leaves.
Billy Vaughn

Offline eaglescouter

  • Instructor In Training 3
  • Hero Member
  • ***
  • Posts: 1320
  • Sac Four Ought Nine
Re: Handloading 6.5 Creedmoor
« Reply #1 on: July 09, 2018, 11:53:43 AM »
Same sizing die regardless.
Obviously your decapper needs to have a pin that will fit thru the primer hole.

If you are running a bolt gun you can just neck size.
If you are running a gas gun you will probably be best served by full length resizing.
Make yourselves good scouts and good rifle shots in order to protect the women and children of your country if it should ever become necessary.
--Lord Baden-Powell
Scouting for Boys (1908)