10/22 Auto Bolt Release modification

[wesm]

I know the auto-bolt release is probably about the easiest mod to do to a 10/22 rifle, and a lot of you have undoubtedly already done this, but for some reason I have always been hesitant to start grinding on my gun.  I was afraid I'd screw it up, I guess.  Finally got "over it" tonight in advance of an Appleseed this weekend; at the last one I worked, someone was having trouble with my loaner's factory bolt release.  So tonight I got out the Dremel tool.

Guys, if you haven't done this modification to your 10/22 yet, DO IT NOW.  It took me all of 15 minutes, and that was only because I spent about 5 looking for a pin I had misplaced, and another 5 fine-tuning my grinding after testing it once.  IT IS EASY.  I used this video from Youtube: http://www.youtube.com/watch?v=jl2n7V0-ac4 as an instructional, and it really doesn't take but 5 minutes to do the work on your rifle.

Best mod you can make to your 10/22 after the Tech-Sights, and doesn't cost a thing if you have a Dremel tool.  Just make sure you keep up with the pins you take out of the trigger group!   

[sparks1]

Yay...glad it's done and you are confidant in the modification. Dremel works great...I did mine with a small file. Which, by the way is a bit tedious, but about 10 minutes work.

Rimfirecentral has a stickie on the same mod.

http://rimfirecentral.com/forums/showthread.php?s=&threadid=30867

Also alot more information on 10/22s and other makes.

[oladcock]

Yep, I've done about a dozen of them. Easy to do and works great!....O.L.