News:

Want Appleseed to grow and fill our firing lines?  We need help with advertising, social media, graphics design, and administrative tasks.  An hour of time spent at this level can have a huge impact.  You can make a difference!  Send a Personal Message to Cleveland.

Main Menu

toolsforbuildingthelibertytrainingrifle?

Started by biathlon, November 16, 2008, 02:14:57 PM

Previous topic - Next topic

biathlon

OK guys and gals, I've got a lot of parts and have NO idea how to get the factory front sight out of the dovetail and install my new tech sight there. Any advice would be helpful and very much appreciated.

MeanStreaker

If you have a stable way to hold the barrel (vise with protective cover around the barrel), it will help a lot.  Then use a punch and a hammer, not rubber mallet.  If it doesn't come out easily, be prepared to start really whacking that thing. :)

Or, if you have a gunshop nearby, I'm sure they'll knock it out for almost nothing (or nothing if you're known there.)  When I bought my second LTR, they took it in the back and punched out the front sight in about 2 seconds. 
Those who expect to reap the blessings of freedom must, like men, undergo the fatigue of supporting it.
--Thomas Paine

Used to ride a Kawasaki Mean Streak motorcycle.  I'm not an angry, naked runner.  :)

funfaler

I supported the barrel on a couple of 2x4s, one at the barrel end, the other near the receiver.

Then I used a wood dowel (no brass punch available) and WACKED the dowel with a hammer to drift the sight out.  It is just pressed in there, nothing hold it but friction, so all it takes is some WACKING.

When you install your Tech Sights, use plenty of Lock-tite, on every screw.

The dips in your couch will go away if you get up and take the Seventh Step!

Nickle

The proper tool to use is a front sight adjusting tool. The mentioned methods work.

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=754137&t=11082005

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=732798&t=11082005

$53 to $60. I have one of the Williams tools. Fine if you're in the business, but hardly worth the cost otherwise. Support the base, drive it out.

They have men amongst them who know very well what they are about, having been employed as Rangers against the Indians and Canadians and this country being much covered with wood, and hilly, is very advantageous for their method of fighting. . . . ".  Lord Percy

Sounds like New Englanders to me.

wcmartin1

"Unhappy it is, though, to reflect that a brother's sword has been sheathed in a brother's breast and that the once-happy and peaceful plains of America are either to be drenched with blood or inhabited by a race of slaves.  Sad alternative!  But can a virtuous man hesitate in his choice?" - George Washington - from a letter to a close friend after the events of April 19, 1775

"There is no nation on earth powerful enough to accomplish our (the United States) overthrow.  Our destruction, should it come at all, will be from another quarter.  From the inattention of the people to the concerns of their government, from their carelessness and negligence, I must confess that I do apprehend some danger.  I fear that they may place too implicit a confidence in their public servants, and fail properly to scrutinize their conduct; that in this way they may be made the dupes of designing men, and become the instruments of their own undoing." - Daniel Webster, June 1, 1837

ashlock

Dremel worked for me. Just cut down the center of the sight. Can't put it back in after that tho  ;D

colycat

Could someone move this to the LTR site?  It is so hard to keep track of things, maybe its just me.

Coly
"These are the times that try men's souls. The summer soldier and the sunshine patriot will, in this crisis, shrink from the service of their country; but he that stands it now, deserves the love and thanks of man and woman. Tyranny, like hell, is not easily conquered; yet we have this consolation with us, that the harder the conflict, the more glorious the triumph. What we obtain too cheap, we esteem too lightly: it is dearness only that gives everything its value."   T Paine

100