News:

Want Appleseed to grow and fill our firing lines?  We need help with advertising, social media, graphics design, and administrative tasks.  An hour of time spent at this level can have a huge impact.  You can make a difference!  Send a Personal Message to Cleveland.

Main Menu

bullet damage

Started by Old Dog, July 13, 2007, 06:36:31 PM

Previous topic - Next topic

Old Dog

Some "pulled" bullets have marks (ranging from a scratch to a slightly crimped line) on them from the collet.  Has anyone reloaded any of these and if so did it have a noticeble effect on the trajectory/accuracy of the bullets?
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."

—Jeff Cooper, The Art of the Rifle

raf

If the marks are slight and symmetrical, the difference is negligable.

If the marks are deep and symmetrical, there may be some additional drag, but accuracy shouldn't be affected.  Terminal ballistics, i.e. bullet break-up, may become a factor.

It's the asymmetrical pull marks that are problematic, although not always.  Tough to call.

If the bullet is really messed up, but still able to shoot through a barrel, it can still be used for load development, thus saving the better bullets.

Old Dog

Thanks, I might try pick out some of the worst ones and try them at 25 yds. (Appleseed & AQT).
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."

—Jeff Cooper, The Art of the Rifle

Oohrah

I have fired with and without the pulled marks.   Also pointed
soft nose that have have flattened points from magazine
batter.   No noticable change in accuracy or impact change.