News:

Want Appleseed to grow and fill our firing lines?  We need help with advertising, social media, graphics design, and administrative tasks.  An hour of time spent at this level can have a huge impact.  You can make a difference!  Send a Personal Message to Cleveland.

Main Menu

RCBS X Dies

Started by TN_Dadx5, August 15, 2011, 04:54:18 PM

Previous topic - Next topic

TN_Dadx5

I'm just getting into reloading and have picked up a press (kit) and I'm wondering about dies.  The first round that I'm going to reload is 308 for my AR-10.  I've read about most dies out there and I like the Lee PaceSetter set and the RCBS X Dies.  I like the idea of minimizing case stretch during resizing and trimming the case just once.  Minimizing steps is something that I like.  Has anyone worked with these before?
"A nation of well informed men who have been taught to know and prize the rights which God has given them cannot be enslaved. It is in the region of ignorance that tyranny begins." Benjamin Franklin
Visit and "Like" the TN Facebook page
https://www.facebook.com/#!/Tennesse.Project.Appleseed

Son of Martha

Yup, use Imperial sizing die wax and an X-die and you will be a happy camper.  5 reloads and haven't had to trim again yet...

SoM
Raise ye the stone or cleave the wood to make a path more fair or flat
Lo, it is black already with blood some Son of Martha spilled for that
Not as a ladder from earth to Heaven, nor as a witness to any creed
But simple service, simply given, to his own kind in their common need.

Charlie98

Understand, your brass has to be trimmed to a specific length before you start to use the die, you can't run an oversized case into it and expect it to bump the OAL of the fired case back.

I've considered one of those for my 7.62mm reloads... let us know how you fare...
"I have this pistol pointed at your heart!"

"...that is my least vulnerable spot."