News:

Want Appleseed to grow and fill our firing lines?  We need help with advertising, social media, graphics design, and administrative tasks.  An hour of time spent at this level can have a huge impact.  You can make a difference!  Send a Personal Message to Cleveland.

Main Menu

Ruger 10/22 Sling

Started by SteveB, January 11, 2019, 02:54:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

SteveB

January 11, 2019, 02:54:07 PM
I have a new 10/22 with a synthetic stock.  The stock has molded in tabs with holes for sling swivel mounting.  The front tab is at the very end of the stock front, and the rear tab is about 1/3 from the end of the butt end.  My question is are these mounting locations good for using a sling with the program?  I see other 10/22s with the front swivel closer in.  Thanks

Tennessee Beast

#1
January 11, 2019, 03:33:19 PM
There isn't anything wrong with those locations.  Some people like swivel studs at different locations.  Try it.  If you don't like the locations, put swivel studs elsewhere. 
In giving us dominion over the animal kingdom, God has signified His will that we subdue the beast within ourselves.
John Lancaster Spalding

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
Benjamin Franklin, 1775

"A free people ought not only to be armed, but disciplined; to which end a uniform and well-digested plan is requisite; and their safety and interest require that they should promote such manufactories as tend to render them independent of others for essential, particularly military, supplies."  George Washington 1790

"[T]o preserve liberty, it is essential that the whole body of the people always possess arms, and be taught alike, especially when young, how to use them…"
- Richard Henry Lee, Declaration Signer

Practice every time you get a chance. - Bill Monroe

Monkey

#2
January 11, 2019, 04:20:22 PM
Agree.  Those locations are fine, as you describe them.

That said, a picture would be helpful too.

Depending on your setup, it is possible to have your sling swivel too far forward - not typically seen in 10/22's though.
"5 minutes for this stage - that's like a week in people years!"

"Responsibility is a unique concept... You may share it with others, but your portion is not diminished. You may delegate it, but it is still with you... If responsibility is rightfully yours, no evasion, or ignorance or passing the blame can shift the burden to someone else. Unless you can point your finger at the man who is responsible when something goes wrong, then you have never had anyone really responsible.�
― Hyman G. Rickover

"Scoring is a function of great execution, and winning Is the result, but thinking about winning can pull your focus off of proper execution in a competition. Thinking about process is the answer."- Lanny Bassham

Tennessee Beast

#3
January 11, 2019, 05:26:43 PM Last Edit: January 11, 2019, 05:32:55 PM by Tennessee Beast
It is probably this one.

https://ruger.com/products/1022Carbine/specSheets/1278.html

The barrel band can be switched to one with a swivel, sling slot,  or picatinny rail.

Also, both Uncle Mike's and Grovtec make swivel studs that go in the barrel band.  Unfortunately, they come from the factory with 1" detachable swivels and some users have said the studs don't work well with synthetic stocks.  YMMV.  You may be able to find them separately (Google "10/22 barrel band swivel").

In giving us dominion over the animal kingdom, God has signified His will that we subdue the beast within ourselves.
John Lancaster Spalding

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
Benjamin Franklin, 1775

"A free people ought not only to be armed, but disciplined; to which end a uniform and well-digested plan is requisite; and their safety and interest require that they should promote such manufactories as tend to render them independent of others for essential, particularly military, supplies."  George Washington 1790

"[T]o preserve liberty, it is essential that the whole body of the people always possess arms, and be taught alike, especially when young, how to use them…"
- Richard Henry Lee, Declaration Signer

Practice every time you get a chance. - Bill Monroe

Monkey

#4
January 11, 2019, 07:57:20 PM
Quote from: Tennessee Beast on January 11, 2019, 05:26:43 PM
It is probably this one.

https://ruger.com/products/1022Carbine/specSheets/1278.html

The barrel band can be switched to one with a swivel, sling slot,  or picatinny rail.

Also, both Uncle Mike's and Grovtec make swivel studs that go in the barrel band.  Unfortunately, they come from the factory with 1" detachable swivels and some users have said the studs don't work well with synthetic stocks.  YMMV.  You may be able to find them separately (Google "10/22 barrel band swivel").

TB,

I imagine you're right. 

I have a couple ATI adjustable stock 10/22s (Ruger branded) where the swivel stud can be mounted pretty close to muzzle.

If it's the standard vanilla synthetic stock, there shouldn't be any issues.
"5 minutes for this stage - that's like a week in people years!"

"Responsibility is a unique concept... You may share it with others, but your portion is not diminished. You may delegate it, but it is still with you... If responsibility is rightfully yours, no evasion, or ignorance or passing the blame can shift the burden to someone else. Unless you can point your finger at the man who is responsible when something goes wrong, then you have never had anyone really responsible.�
― Hyman G. Rickover

"Scoring is a function of great execution, and winning Is the result, but thinking about winning can pull your focus off of proper execution in a competition. Thinking about process is the answer."- Lanny Bassham

Charles McKinley

#5
January 11, 2019, 11:33:04 PM
The factory locations would work fine for me.  If you wanted to add one closer to you on the fore end just use the stud with the machine screw threads and nut.  You can epoxy it as well but that is over kill.

Please do not put 1 inch swivels on it.  The inch sling just do not compare to an 1 1/4" slings.  They are flimsy and twist them selves into nots.

Just ask Invictus Maneo what his dummy rifle looks like after I demo for him. ;D
Last evening, it occurred to me that when a defender of Liberty is called home, their load lands upon the shoulders of the defenders left behind. Just as the Founders did their duty for Liberty, every subsequent generation must continue their work lest Liberty perish. As there is no way for the remaining adults to take on the work of those that die, we must pass the ideals and duties on to the children. -PHenery

Charles McKinley

#6
January 11, 2019, 11:45:50 PM
https://www.amazon.com/Swivel-Screws-Mounting-Hunting-Shotguns/dp/B01LXM86FJ/ref=sr_1_1?ie=UTF8&qid=1547264283&sr=8-1&keywords=sling+swivel+screw

This is just for an example of the stud and nut.

If it is the rifle in TB's link I wouldn't change the rear stud.  I not fond of the sling swivels the attack to the plastic barrel band.
Last evening, it occurred to me that when a defender of Liberty is called home, their load lands upon the shoulders of the defenders left behind. Just as the Founders did their duty for Liberty, every subsequent generation must continue their work lest Liberty perish. As there is no way for the remaining adults to take on the work of those that die, we must pass the ideals and duties on to the children. -PHenery

SteveB

#7
January 12, 2019, 10:27:32 PM
Thank you all for the help.  I am going to order the black cotton strap and the swivel set from the Appleseed store.


SteveB

#8
January 17, 2019, 09:51:07 PM
My Appleseed store cotton sling and swivels arrived today.  I have watched a few YouTube videos on the adjustment and use in the various shooting positions so I basic idea of the placement.  I was amazed how the sling helped in a standing position.  I will go back and watch the videos now that I am set up Appleseed style.  Thanks again for all the input.

cwcdl79

#9
January 18, 2019, 08:39:47 AM
You may want to take the locking cam buckle off and flip it around so the flat side is against your wrist...it's really not comfortable the other way. Ask me how I know...

RedLeg

#10
January 18, 2019, 09:44:38 AM
Quote from: cwcdl79 on January 18, 2019, 08:39:47 AM
You may want to take the locking cam buckle off and flip it around so the flat side is against your wrist...it's really not comfortable the other way. Ask me how I know...

Additionally, with a QD sling swivel on the rear, I pull that metal hook off all my slings and sling directly through the swivel like you have up front.  I find it just makes for cleaner look and is more hassle free in use.  The only time I keep that metal clip is if my rear sling attachment is fixed, such as on a standard, non-collapsible AR15 rifle stock.
"If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace.
We seek not your counsel nor your arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen." - Samuel Adams

"Posterity! You will never know, how much it cost the present Generation, to preserve your Freedom! I hope you will make a good Use of it. If you do not, I shall repent in Heaven, that I ever took half the Pains to preserve it." - John Adams in a letter to Abigail, 26 April 1777

Tennessee Beast

#11
January 18, 2019, 10:37:05 AM
Quote from: RedLeg on January 18, 2019, 09:44:38 AM
Quote from: cwcdl79 on January 18, 2019, 08:39:47 AM
You may want to take the locking cam buckle off and flip it around so the flat side is against your wrist...it's really not comfortable the other way. Ask me how I know...

Additionally, with a QD sling swivel on the rear, I pull that metal hook off all my slings and sling directly through the swivel like you have up front.  I find it just makes for cleaner look and is more hassle free in use.  The only time I keep that metal clip is if my rear sling attachment is fixed, such as on a standard, non-collapsible AR15 rifle stock.

I have a differing opinion... YMMV.   I like to keep the J hook on whether I have detachable swivels or not.  My reasoning is that it is easier to see that I have the "junk" on the outside of my bicep.  In my experience, the J hook makes it easier and faster to change sling positions during the AQT.  Additionally, this keeps my setup on my 10/22 the same as my AR-15.  I will say that if I was going to take the 10/22 hunting, I would consider doing as RedLeg suggested to reduce noise as well as make a more secure connection.

In giving us dominion over the animal kingdom, God has signified His will that we subdue the beast within ourselves.
John Lancaster Spalding

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
Benjamin Franklin, 1775

"A free people ought not only to be armed, but disciplined; to which end a uniform and well-digested plan is requisite; and their safety and interest require that they should promote such manufactories as tend to render them independent of others for essential, particularly military, supplies."  George Washington 1790

"[T]o preserve liberty, it is essential that the whole body of the people always possess arms, and be taught alike, especially when young, how to use them…"
- Richard Henry Lee, Declaration Signer

Practice every time you get a chance. - Bill Monroe
Print
Go Up Pages1
User actions