If you own a 10/22 takedown rifle, would you please post a picture of the side of your rifle?
As best as I can tell, the 10/22 was sold with a traditional fold-down rear sight or a fiber optic rear sight option that doesn't fold down.
Specifically, I'm looking to see how high the stock rear sight is compared to the top of the receiver.
thanks,
Rusty
I have the scope rail that came with it mounted so these photos aren't referenced from the top of the receiver. Hope it's helpful anyway.
When flipped down the adjustment screws are 2-3/16 from the end of the rail.
(https://i.imgur.com/nDZnHDF.jpg)
The tops of the screws are 1/8" below the rail, or 1/8" above the receiver top when folded down.
(https://i.imgur.com/K2V7MY6.jpg)
The top of the rail is about halfway between the top of the sight and the top alignment mark. It's really hard for me to hold everything and take a picture, but the top of the adjustable plate is 1/32" below the top of the rail when it's on the center mark.
(https://i.imgur.com/y4NreAf.jpg)
Great pics! Thank you!