Project Appleseed

Road to Rifleman => Rifle / Ammo / Gear => Topic started by: Mutant Texan on December 24, 2018, 04:13:24 PM

Title: Popup iron sights
Post by: Mutant Texan on December 24, 2018, 04:13:24 PM
I have had a set of Spikes Tactical popup iron sights for many years.  Today I grabbed the 300 AAC AR pistol that they were installed on to take on a road trip.  I discovered that the rear sight base had broken in what appears to be a clean break.  See picture.

I only own 1 set of these sights and I am horrified at what I see.  I never abused them and I did not over torque them.  The base is made of anodized aluminum.  This is a lot less forgiving than steel.

I own several sets of Magpul Mbus Pro popup sights and have never had an issue with them.  I actually prefer the sight picture of them over the Spikes Tactical.  Best of all, they are made of steel with a melonite case hardening.

This is just something to keep in mind when buying popup sights.  Would you rather have steel that is more forgiving or slightly lighter aluminum?
Title: Re: Popup iron sights
Post by: BD on December 25, 2018, 11:35:21 AM
I'm a big fan of the MaTech backup rear sight.  It looks flimsy, but it's really not.
It's also adjustable out to 600 yards with big white numbers for the settings.
The graduations seem to be pretty accurate when I tested it out to 500 yards.
Title: Re: Popup iron sights
Post by: AJ Gonzales on December 26, 2018, 12:30:01 AM
I've got the Knights Armament 600m on all my AR rifles. It's solid and the distance adjustments are very close if not spot on. Note that it's in meters, not yards, so adjust accordingly based on your actual range.

There's a 25m zero setting (perfect for AS stuff), and then you can dial it down for a 200m setting which is very practical for most shooting.

They come up on eBay in the 80-90 dollar range pretty frequently.

Title: Re: Popup iron sights
Post by: Mike AKA Bandaid on December 26, 2018, 01:28:24 AM
I had no idea that Magpul made anything other than plastic. Thanks for posting this, I just learned about the Magpul MBUS Pro Sights!!

Huzzah!
Title: Re: Popup iron sights
Post by: Lomshek on December 28, 2018, 12:37:42 AM
Quote from: Mike AKA Bandaid on December 26, 2018, 01:28:24 AM
I had no idea that Magpul made anything other than plastic. Thanks for posting this, I just learned about the Magpul MBUS Pro Sights!!

Huzzah!

There's also the MBUS Pro LR adjustable rear that goes out to 600!
https://www.magpul.com/products/mbus-pro-lr-adjustable-sight-rear (https://www.magpul.com/products/mbus-pro-lr-adjustable-sight-rear)

(https://www.magpul.com/Files/Files/Images/Products/MBUS-Sights/MAG527/Gallery/BLK/MAG527_BLK_2.png?bgcolor=F5F5F5)

Title: Re: Popup iron sights
Post by: AJ Gonzales on December 28, 2018, 10:51:13 AM
Oh I like that!
Title: Re: Popup iron sights
Post by: dart67eb on February 19, 2019, 04:50:19 PM
This is what I have.  I believe they may be mil-spec since they have an NSN.

Quote from: Mutant Texan on December 24, 2018, 04:13:24 PM
I have had a set of Spikes Tactical popup iron sights for many years.  Today I grabbed the 300 AAC AR pistol that they were installed on to take on a road trip.  I discovered that the rear sight base had broken in what appears to be a clean break.  See picture.

I only own 1 set of these sights and I am horrified at what I see.  I never abused them and I did not over torque them.  The base is made of anodized aluminum.  This is a lot less forgiving than steel.

I own several sets of Magpul Mbus Pro popup sights and have never had an issue with them.  I actually prefer the sight picture of them over the Spikes Tactical.  Best of all, they are made of steel with a melonite case hardening.

This is just something to keep in mind when buying popup sights.  Would you rather have steel that is more forgiving or slightly lighter aluminum?